Tag: Art Glass

How to Use Freeze & Fuse Create Glass

You can use the glass furnace to create large pieces of three-dimensional artistic glass, such as plates and jewelry with the freeze and fuse technique. Freezing and blending is a pate de Verre technique that fuses the technique over low heat. If you are looking for a specific oven such as skutt gm1414 please visit https://www.artglasssupplies.com/skutt-gm1414-studio-series-glass-kiln-2.

You can use a freeze and melt piece as jewelry or you can melt them into glass pieces like bowls, plates, etc. Is that how it works? You will need a flexible mold, like the one used to make soap or candy.

The clear glass powder is cheap and can be used as a base, while the other colored glass powder is added to produce the effect of different colors. You will be amazed at the variety of different colors you can achieve by adding varying amounts of the basic colored clear glass powder.

Mix 90% 10% cleansing and the color gives it a smooth color, while a mixture of 50% – 50% produces strong tints. Therefore, changing the color mixing percentage allows you to achieve a variety of shades with the same color.

It is necessary to use a dust mask when performing this technique since inhaling small glass particles is highly toxic. If the piece you are using more than one color, you should mix colors in separate cups.


Using Old Fused Glass Again

Have you ever heard the saying "Everything old new again"? Well, this article explains the same theory about dichroic fused glass. First a bit of background, fused glass is the joining of two or more panes of glass COE compatible.

There are plenty of tutorials on how to integrate the glass so I'm not going to focus on aspects of fused glass. However, most of the tutorial does not discuss what to do to say no chunks or pieces of plain perfect. That's what I want to discuss in this article.

COE90 Duncan Dichroic

Fused will return to Old is New Again concept; glass can be fired several times. Therefore, if you make a mistake with a piece of fused glass not just throw it away or give up on the experiment to make something new out of it.

When I first kiln me one of the pieces I was not right but it has beautiful colors including purple, blue, and clear glass that I just do not want to waste. So instead of disappointed that it has not changed the way I want, I got a hammer, and both need to say I made some wonderful pieces of jewelry from my "mistakes".

But it does not stop there when referring to create new fused glass pieces blend of old. I am a simple person and when I started my fuse does not include a lot of decals or designs or dichroic glass in my pieces.